مكبس هيدروليكي Anton Bauer Hyproloc 3000

Used Anton Bauer Hyproloc 3000
2000 ton capacity Hydraulic press
Free standing
With hydroforming capability
Siemens Sicomp PC32-F control
275cm x 150cm bed size
190ton weight
Bed Height from Floor: 36 Inches
Control Type: Siemens PLC
Daylight Opening: 78.5 Inches
Dimensions: 154 x 154 x 244 tall Inches
Voltage (Machine): 3x415V/50Hz
Maximum die clamping force: 2000 Tons (20,000 kN)
Die Table: 154 x 154 with T-slots to attach lower die
Closed Die Installation room: 79 x 154 x 47
Table height: 36 over ground
Stroke to open die: 31.5
Daylight opening: 78.5
Hydraulic machine system consisting of
(2) hydraulic pumps
Monitoring units for temp
pressure
level & filtration
(2) cooling systems
Forming system consisting of
Forming fluid tank
Pump unit for the pressure ntensifier
Shielded pressure intensifier with valve system
Forming fluid filter system
Machine motion control system: Siemens PLC
Machine forming process control system
Industrial computer with Hyproloc program
Delta servo Hydroloc controllers (24 axis)
Cycle time of less than 20 seconds
Forming speed controllable to 25mm/s
Main voltage: 3x415V/50Hz
control voltage: 24V DC
Power: 300 kVA