ماكينة الطباعة الفلكسو Lehner P2-530

LEHNER P2-530 (PASSWERK 540)
Pass-Werk automatic labels flexo plate-mounting device
Printing width 130 to 520mm (up to 530mm cylinder width)
Printing length 222,25mm to 635mm
Cylinder circumference 70 teeth (8 3/4 ") to 200 teeth (25")
plate material 1.14mm / 1.7mm
Mounting time approx. 90 sec
PASS-WERK Automatic Mounting Machine for Flexo Plates P2530-2The mounting machine mounts flexo plates reproducible
print image related
print unit specific and operator independent in in less than 2 minutes with a tolerance range of less than +/- 0.03mm
The double-sided adhesive tape (tape) is applied in advance outside the machine. Adhesion sleeves can also be used
Before applying the tape
you inform the automatic assembly machine of the basic data (print width
print length and cylinder width) via a touch screen on the front of the machine. Optionally
the information can be transmitted via an interface from the ERP system or an EAN scanner can be transmitted
Offset mounting allows you to mount the gap of the printing plate joint offset by one benefit to the tape joint to the tape joint
Using an optical measuring system
the automatic assembly machine determines the exact position of the printing forme on the positioning table and mounts the printing forme precisely and fully automatically onto the inserted impression cylinder
The mounting process is monitored and controlled by means of a control line