جديد بلدوزر Case 1650L

CASE 1650L

Available for sale at the factory!!! Official dealers


Engine
Model FPT Industrial Engine F4HE9864U, Tier3 certified
Number of cylinders 6
Displacement 6.7 litres
Fuel injection Common rail
Fuel filter Screw-in, with mesh
Cooling Liquid
Engine speeds Rev/min
Revolutions without load 2200 +\- 50
Rated - full load 2200
Low idle speed 800 +\- 25
Power according to SAE J1995 at 2200 rpm
Useful 144 hp (107 kW)
Full 156 hp (116 kW)
Engine lubrication
Pump working angles Forced with oil injector piston cooling system
Transverse/ longitudinal 45°
Radiator
Cooling area 0.61 m²
Number of rows of tubes 4
Fan
Diameter 660 mm
Drive Mechanical belt drive

Transmission cooling
Type Heat exchanger
Cooling area 0.54 m²

Electrical system
Generator 65 A
Batteries(2) 2x12 V in series, maintenance-free, 750 A CCA - at -18 °C

Power transmission
Hydrostatic, bidirectional
Variable displacement axial piston pump
Variable axial piston motor
Maximum pulling force 275 kN
Transmission One control lever with electronic tracking of straight line movement
Oil filter 4 microns, screw-on, replaceable
Travelling speeds
Forward 0-9.7 km/h
Reverse 0-9.7 km/h
SAHR parking brake Spring-actuated, hydraulically released
Travel brake Hydrostatic
Final drive 2 helical gears and planetary gearbox
Transmission ratio 61.4:1



Hydraulics
Pump flow at 2200 rpm 132 l/min
Max. pressure 207 bar
Number of cylinders for lifting the full swing blade PAT 2
Channel diameter 88.9 mm
Rod diameter 50.8 mm
Stroke 826 mm
Number of cylinders for swinging the full swing blade PAT 2
Channel diameter 101.6 mm
Rod diameter 50.8 mm
Stroke 826 mm
Number of cylinders for lifting the full swing blade PAT 1
Channel diameter 127 mm
Rod diameter 63.5 mm
Stroke 135 mm

Operator's workplace
ROPS\FOPS air-conditioned cab, one joystick for speed and direction; seat, adjustable, on pneumatic suspension; 50.8 mm retractable belt; adjustable armrests; two footrests; rear-view mirror, three windscreen wipers, overhead light, 12 V socket; soft ceiling; floor mats.
Signal lamps
Air filter, alternator, diagnostic indicator, coolant temperature, engine oil pressure, hydraulic filter, low fuel level, maintenance indicator, transmission filter, transmission load pressure
Indicators.
Battery voltage; fuel level; hour meter/tachometer/diagnostics/maintenance reminder; transmission oil temperature; transmission speed indicator; coolant temperature
Sound signals
Engine coolant temperature, engine oil pressure; low fuel level; hydraulic/hydrostatic system oil temperature

Operating weight
Machine with cab, full tank, 77 kg operator, front hook, track protection, full swing PAT blade
XLT version (extended undercarriage) 17960 kg
Additional weight
Tow bar 66 kg
Roughing machine 1600 kg
Roller protection 242.2 kg

Blade
Adjustable blade tilt 55° - 60°
Lifting speed 483 mm/s
Reversible and replaceable cutting edge
Width 200 mm
Length 2352 mm
Thickness 20 mm

Undercarriage
Chain tensioning Lubrication injection
Frame Two-piece chassis made of steel sections
Track link pitch 190 mm
Track shoe height 56 mm
Pin diameter 38.5 mm
Bushing diameter 65 mm
Number of track links per side 45
Number of support rollers per side 8
Number of support rollers per side 2
Rollers diameter 203 mm

Track on the ground
Shoe width 559 mm
Support area 34093 cm²

Loosener
Maximum immersion 478 mm
Width 1985 mm
Cutting width 1942 mm
Maximum clearance above the ground 262 mm
Maximum number of tines 3
Tooth spacing with 3 tines 940 mm
Double-acting hydraulic cylinder
Diameter 102 mm
Stroke 254 mm
Rod diameter 51 mm

Filling tanks
Fuel tank 300 l
Engine with filter 16.4 litres
Engine without filter 15.6 l
Engine cooling system 32.5 l
Hydraulic tank 98.4 l
Final drive, per side 14.2 litres
Support roller, each 0.275 litres
Guide wheel, each 0.225 litres
Support roller, each 0.334 litres