جديد ماكينة صهر البيتومين Ustanovka dlya plavleniya big-begov

ITALMACHINERY BIGBAG MELTING UNIT

GENERAL CHARACTERISTICS:
• Melter designed to melt bitumen packed in big bags
• Productivity 10-12 t/h
• Tank volume 14.000kg
• 2 hatches for loading big bags
• Pumping of hot bitumen from any side of the plant thanks to flexible design
• Bitumen pipeline up to 6m for the 1st bitumen tank

CHARACTERISTICS OF THE MELTING UNIT
• Melting capacity: 10–12 t/h (Calculated bitumen temperature 110°C).
• Dimensions: 2250 x 10300 x 2250 mm
• Weight: 13.800 kg (pump, spare cage, platform, etc. not included)
• Total weight: 14.900 kg (may vary depending on modifications)
• Load cage: 1.300 x 1.280 mm
• Heating: Thermal oil
• Required minimum heat output: 500.000 kcal/h

MELTING UNIT - MELTING ZONE
• Power: 2x big bag melting cages
• Cage coil heating area: 4.2 x 2 = 8.4m²
• Total heating area of the melting zone: 35m²
• Heating coils: Ø 60.3 x 3.6 mm, DIN 2448, EN 10216-1, seamless steel pipes
• Insulation: 50mm thick, 80kg/m³ min. cotton wool
• Sheathing: 1.5mm aluminum

MELTING UNIT - TANK
• Tank volume: 14 tons
• Tank coil heating area: 80m²
• Heating coils: Ø 60.3 x 3.6 mm, DIN 2448, EN 10216-1, seamless steel pipes
• Insulation: 50mm thick, 80kg/m³ min. cotton wool
• Sheathing: 1.5mm aluminum