جديد ماكينة التمليط Małek Agregaty M-4 MAX SPEED 400V , Verputzmaschine M4 MAX SPEED 400V

إظهار قائمة الأسماء
إظهار قائمة الأسماء

Our offer includes plastering aggregates for applying mortars, distinguished by high quality and careful workmanship, and above all, reliability, which in the construction industry, due to even tight work schedules, is extremely important.

The proposed devices have appropriate approvals and CE certificates. In response to customer expectations, we create solutions that meet the requirements, always putting accuracy and the highest standards in the first place.

The choice of our plastering aggregates guarantees efficient and uninterrupted work. Choose the model that works best for your business. Each of the proposed machines is characterized by a different specification, careful reading of the information will allow you to select the optimal device that will meet the requirements and meet your expectations. Below we present the most important information about the model of the M-4 Max SPEED 400V plastering unit.

The unit is well suited for feeding materials up to 60 m (distance depends on the material).

High feeding capacity, approx. 6-40 l / min.

The aggregate tank can be filled with either bagged material or through the flow or blow cap.

PURPOSE OF THE UNIT

The M-4 MAX SPEED plastering unit is designed for mixing and mechanical feeding of mortars with a grain size of up to 4 mm (adapted for mechanical feeding according to manufacturers' recommendations), such as:

gypsum plaster
gypsum and lime plaster
cement
lime plaster
lime-cement plaster
mortar
damping plaster
joint mortar
reinforcement and adhesive mortar
anhydrite screeds
and other.

Characteristic data of basic equipment

NORD 0.83 kW feeder gear motor S3-70%; 29 rpm
gear motor Feed pump NORD 7.5 kW S3-60%; 426 rpm
water pump PK65 380 - 400V 1.7 A 0.5KW
pump unit D6–3 stator + rotor
compressor M-4 MAX SPEED 400V 50HZ 2.2kW 400 l / min 6 bar 3 cylinders oil-free
cleaning unit - shaft and cleaner
socked wrench
working hose cleaning ball
water meter 150 - 1500 l / h
10 m long working hose DN35 for hydraulic connection with a cam-lock
3/4 "25 m reinforced hose into water
3/8 ”air reinforced hose
5x 2.5 20 m power cord with a 5B PCE 32A plug
75 cm spray lance with rotating aluminum connector
gun scraper
A key to unscrew the water reducer glass
working pressure timer with a separator for 100 bar spouts DN35
male camlock reduction DN35 / 25
pump yoke DN35 female camlock DN35

MAIN UNIT COMPONENTS

The subassemblies that can be removed from the aggregate if necessary (including transport) are:

compressor M-4 MAX SPEED 400V 50HZ 2.2kW 400 l / min 6 bar 3 cylinders oil-free
water pump PK65 400V
mixing chamber with a 7.5 kW mixing pump 428 rpm.
near the feeder
feeder wheel cover
charging grate

Additional information

The warranty is granted for 12 months.

The machine's components are of high quality, so with proper maintenance it will provide many years of failure-free operation.

The electric box was assembled on EATON components

All contactors, switches and power sockets are made by PCE.

Pedrollo 380V water pump.

The machine has an auto and continuous pump control (in the absence of water pressure).

It also has two 230V sockets, one controlled to connect an additional pump when supplying the tank, the other to connect, for example, a lamp.

The machine is equipped with a button to reverse the mixture in reverse in the event of a blockage in the hoses.

It also has phase sequence protection.

The weight of the plastering unit with all main components is 320 kg.

The set of the M-4 Max aggregate includes:

WORKING PRESSURE CLOCK DN35
WATER HOSE 25 meters
AIR HOSE 12.5 meters
CABLE WITH PLUGS 20mb 5x32A
SPRAY LANCE 75cm WITH ALUMINUM SWIVEL JOINT
SCRAPER
THE KEY TO UNLESS THE WATER REDUCER GLASS
KEY FOR SCREWING THE ROTOR
CZYSZCZAK
PIN
MIXER
2 CLEANING BALLS fi 35
COMPRESSOR M-4 MAX SPEED 400V
CONCRETE HOSE fi 35x7,5 CHANGED 10m
MALE REDUCTION CAMLOCK DN35 / 25
YOKE PUMP DN35 CAMLOCK FEMALE DN35