This DOOSAN Puma 4100B Horizontal Lathe was manufactured in 2018 in South Korea. It is equipped with a maximum workpiece diameter of 550 mm and a maximum workpiece length of 1042 mm. Controlled by a FANUC 0i Series control, it offers a spindle speed of 2000 rpm with a spindle power of 35 kW (30 min) / 22 kW (continuous). This machine accommodates 10 tools and features a A2-11 ASA taper size, providing versatility and precision in machining operations. It comes with chip conveyor, hydraulic, lubrication and cooling system. The machine has a run time of 796 hours, is still under power and can be inspected at any time.
application type: Turning
Location: Bulgaria
machine type: Lathe
availability: Immediately
control unit brand: FANUC
GINDUMAC ID: BG-TUR-DOO-2018-00001
Measurements width: 4654 mm
Measurements depth: 2056 mm
Measurements height: 2194 mm
Spindle speed range: 2000 1/MIN
Spindle motor power: 35/22 (30min/Cont.) kW
Tool taper: A2-11 ASA
X-AXIS Movement: 352mm
Z-AXIS Movement: 1105 mm
Number of stations: 10
Chip conveyor: Yes
Swing over bed: 790mm // swing over saddle: 590mm- Max turning diameter: 550mm- Max turning length: 1042mm- Bar working diameter: 116. 5mm- Accuracy: positioning x
z: 0,01/0,02mm- Repeatability: ±0,002 / ±0,003- Drive mechanism - belt drive + gear box standard chuck size: 380(15”) mm // spindle nose: a2-11 asa // spindle bearing diameter (front): Ø180 mm // spindle through hole diameter: Ø132 mm // bore of draw tube: Ø117. 5 mm- Max. Spindle torque for turning: 2379 n. M- Tail stock - drive mechanism: programmable (drive bar + carriage) // quill diameter: Ø120 mm // quill travel: 120 mm // tail stock travel: 1000 mm // tail stock center: #5 dead center mt- Turret - tool holder mount type: di base holder // number of tool stations: 10 ea // turret indexing type: servo driven type // turret indexing time – full station: 1. 9 // od tool size: 32x32 mm // max. Boring bar size: Ø60 mm // rapid traverse rate x
z - axis: 16/20 m/min // ballscrew (diameter x lead) – x axis: 40 x 8 mm // ballscrew (diameter x lead) – z axis: 50 x 10 mm // servo motor power x
z – axis: 4,0 / 7,0 kw
Tool holder & boring sleeve kit- Easy operating system- Doosan ez guide i- Programmable tail stock- Coolant pump 4 kw 1,0 mpa 30l/min- Tool setter automatic- Signal tower- Oil skimmer- Doosan tool load monitoring- Arbitrary speed threading hardened & ground hard jaws